Retrax
Product Benefits |
The
Competition (Product Differences) |
| One
Piece Polycarbonate (LEXAN
®) Design -
A durable thermoplastic
commonly known as LEXAN®
that is UV treated for protection
from the sun. |
Vinyl
- Vinyl glued
or stapled to aluminum slats.
|
| Strength
- The Retrax
cover is reinforced with
up to 20 tempered aluminum
support beams embedded every
4 3/4", which will
hold 200 lbs. and can easily
support heavy snow loads.
The cover is strong enough
to stand on (not recommended). |
Strength
- The cover
will withstand a concentrated
load of about 120
pounds. A light snow load,
is tolerated. |
| Sealed
Ball-bearing Rollers
- Sealed
ball-bearing rollers mounted
onto each end of the aluminum
support beams allow the
cover to retract or close
easily without the use of
springs or any kind of mechanism.
Anti-bind ball-bearings
mounted horizontally prevent
the cover from binding as
it is opened or closed. |
Wear Strip
- Top and
bottom rail wear strips. |
| Spiral
Track Storage System
- Unique
spiral track system that
prevents the cover from
touching itself as it retracts,
which eliminates wear-and-tear
on the cover. No moving
parts to jam, freeze or
fail. |
Spring Loaded
Drum - Cover
rolls up on top of itself
on a spring loaded drum
similar to a window shade. |
| Lockable
In Any Position Along The
Rail - Retrax
Cover can be latched or
key locked in any position
along the rail. Tailgate
works independently of the
rolling cover. |
Locking
Positions Every 12"
- Intermittent
locking positions every
12 inches. Tailgate works
independently of the rolling
cover. |
| Lock
Handle - The
flush-mounted lock handle,
located at the rear on the
driver's side, provides
easy access when opening
and closing the cover. |
Pull Strap
- Reach
to the center of the cover
and grab a tow strap, walk
back to the truck and pull
the cover back. |
| Tailgate
Area - The
RETRAX™ bed cover overlaps
the top of the tailgate
utilizing an automotive
grade weather strip seal. |
Tailgate
Area - The
cover meets up with the
inside face of the tailgate.
Water runs down the inside
face of the tailgate. |
| Weather
Protection - The
patented RETRAX ™ low-profile
design uses a front cover
that is flush with the rolling
cover; this streamlines
the overall appearance and
provides a firm, dependable
seal to help keep the bed
dry. This design incorporates
automotive grade weather
strip to keep water, snow,
ice and dust out of the
bed. |
Weather
Protection - Water
is channeled to the rails
and canister. The water
must try to pass through
2 small drain tubes to exit
the bed. |
| Maintenance
- No special
maintenance required. Wash
and wax the cover like you
would the hood of your truck.
|
Maintenance
- Requires
treatment with a vinyl protectant.
Should be applied each time
you wash your truck. |
| Customer
Service - The
RETRAX™ will provide you
with the security and convenient
cargo protection that you
deserve. Our commitment
to you doesn't stop there.
We pledge top quality customer
service and provide highly
trained technicians. You
can count on us now and
years down the road; that's
just the way we do business. |
for a limited time!. 
