|
The Power Puck remaps
the fuel delivery of the diesel injection
pump and advances the injection-timing
curve.
The PowerPuck software
works on changing the injection quantities
an advancing the ignition curve, it
will not alter the load pressure directly.
The load pressure is increased due to
the increase in fuel volume delivery.
This in itself makes for an extremely
reliable tuning device with one sole
purpose, POWER!
PowerPuck equipped vehicles
will notice significant improvements
in drivability, whether it is in town,
where speeds constantly change, or on
the highway passing slower vehicles.
Power Puck increase’s
power through the entire RPM range,
at low RPM it will yield better throttle
response; and help maintain speeds on
inclines or when towing. The mid-to-upper
power increase is extremely useful on
the highway to maneuver through heavy
traffic situations.
Stackable with Predator
for a variety of performance levels
Power Pak Features:
50 HP and 150 FT/LB of
Torque (1999-2002)
60 HP and 100 FT/LB of
Torque level one (2003-current)
90 HP and 180 FT/LB of
Torque Level two (2003-current)
PowerPuck installs in
nine easy steps and in less than an
10 minutes, no wires to cut, no seals
will be broken and no feeding cables
through the firewall
Factory spec interlock
connectors and a completely sealed wiring
harness
PowerPuck is designed
to put no additional strain on the Diesel
injection pump. The rotary VP44 injection
pump in the 24v Cummins has a preset
electronic limit to the amount of fuel
it will deliver. Since the PowerPuck
is plugged in between the ECU and injection
pump, the PowerPuck is programmed to
never exceed that limit
2003 - Current PowerPuck
has a 3 position switch that allows
changing between stock, 60HP, and 90HP
settings on the fly.
2003-2007 PowerPucks
Stack with the DiabloSport Predator
U7130(03-05) U7131(06-07) for gains
of up to 200 HP at the rear wheels!
|
