SANYO Automotive Backup Camera System

Backing up your vehicle is often a “hit or miss” situation. And relying on guesswork can lead to expensive vehicle damage. 

SANYO’s new CCA-BC200 Rear View Backup Camera System with AirCam™ technology employs advanced digital processing to deliver accurate, natural-looking rear view images. Freed from distorted wide angle images and hard-to-interpret “fish-eye” perspectives, drivers can now negotiate tight spots and make critical backup maneuvers with safety and confidence.

The CCA-BC200 digitally creates visual guidelines that appear on your car’s video monitor screen (monitor not included). These helpful guidelines make it easy to align your car while backing into parking spaces or parallel parking. Guidelines include vehicle width and distance indicators at two, four and eight feet.

• Features

• Chassis: The camera is built into a compact waterproof aluminum case, suitable for mounting outside the vehicle.

  Imaging Device: The 1/4" type color CCD imager has approximately 270,000 pixels to deliver a high quality picture.

  Wide Angle Lens: The 135° horizontal and 105° vertical viewing angles provide an excellent near field view of anything behind you.

  Digital Correction: The camera has a wide angle view, which typically produces an image distorted at the edges. The CCA-BC200 allows you to digitally correct the signal to display a more natural image. You can also center the image on the vehicle, even when the camera isn't mounted in the center.

  Electronic Control Unit (ECU): The hideaway ECU has three Molex plugs and an RCA jack. The 4-pin Molex plug connects to the camera's attached harness and supplies power and receives signal. The 3-pin Molex plug connects to the Power/Ground/Reverse Trigger harness. The 2-pin Molex plug connects to the control switch harness. The RCA output feeds signal to your monitor. The power lead has an in-line 1 amp fuse.

  Mounting: The rear view camera comes supplied with an adhesive bracket that allows the camera to swivel up and down (or left and right, depending on the bracket position). There is also a screw hole on the bracket so it can be more firmly mounted.

  Compatibility: This camera is compatible with virtually any mobile video monitor featuring a composite video rear view camera input.

  Specs and Dimensions

  Specifications:

  • Power Supply: 12 volts DC/negative ground
  • Max Current Consumption: approximately 300 mA
  • Image Sensor: 1/4" type color CCD
  • Total Pixels: 270,000
  • Effective Pixels: approximately 250,000
  • Angle Of View:
    • Horizontal: approximately 135°
    • Vertical: approximately 105°
  • Operating Temperature Range: -4° to 140° Fahrenheit
  • Minimum Illumination: approximately 1.6 lux
  • Output Signal: 1 Vp-p (75-ohm) NTSC

  Dimensions:

  • Camera:
    • Width: 1.164"
    • Height: 0.915"
    • Depth: 1.193"
  • Camera with Bracket:
    • Width: 1.532"
    • Height: 1.112"-1.445"
    • Depth: 1.296"-1.787"
  • ECU (Electronic Control Unit):
    • Width: 3.405"
    • Height: 1.112"
    • Depth: 2.912" (4.497" with cables)